Waterproof Reverse POE EPON ONU 4 GE Ports RJ45 MDU for FTTX Outdoor

Item No.: 00113
4GE Reverse PoE onu , Material:ABS Plastic
4 10/100/1000 Base-T RJ45 ports
1.25G up/down data stream PON port
Passive poe from multi user-ends
Description Specifiations Application
Description


Waterproof Reverse POE EPON ONU 4 GE Ports RJ45 MDU for FTTX Outdoor

MODEL:G104P-IP65



Product Description

 

 Reverse Power over Ethernet ONU (Reverse PoE for short) is an industry-leading remote multi dwelling unit (MDU) launched by GXCOM, which, on a passive optical network(PON), facilitates power supply for Fiber To The Building (FTTB)installation in corridors, providing broadband network access forfamilies and small to medium enterprises by using category-5 cablesrouted in the building.
 

The  Reverse PoE ONU is a box-type device, providing 1 EPON ports and four LAN user ports, and is powered by the power sourcing equipment (PSE) deployed in users' residences. The Reverse PoE ONU is applied in scenarios where there is no alternating current (AC) power supply in corridors, featuring easy installation and maintenance, broad temperature range, low power consumption,mute design, high stability, environment-friendlily, and energy conservation.

 

Applied in FTTB construction scenarios and placed in network cabinets in corridors, the Reverse PoE ONU connects to the optical line terminal (OLT) by using gigabit-capable passive optical network (EPON) ports and to user PCs by using category-5 cables, providing broadband, voice, and video services.

 

Highlights

 

• Application in FTTB construction scenarios where there is no power supply in corridors: Powered by the PSE in users' residences,the G108P Reverse PoE facilitates power supply for FTTB installation without the need to install an ammeter, reducing cost and dependence on power supply equipment compatibility and achieving min  project input and fast deployment.
• Easy installation: built-in jumpers and only one network cable required.
• Energy efficiency: supplying power in load sharing mode and powering off when not providing services.
• Plug-and-play (PnP) service provisioning: The Reverse POE ONU allows remote issuing of configuration. A management channel and service channel are created after the Reverse PoE ONU is powered on and registers successfully. Manual onsite confiuration is not required.
• Efficient management and maintenance: free of field software commissioning, remote acceptance, remote upgrade and patch installation, and remote fault location.
• Carrier-class reliability design: The system reliability is taken into consideration in hardware, software, and system design to ensure the normal operation of the equipment.


 

 

Specifiations
Technical items Description
PON Interface 1 EPON optical interface
Meet 1000BASE-PX20+ standard
Symmetric 1.25Gbps upstream/downstream
SC single-mode Single fiber, split ratio: 1:64
Transmission distance 20KM
PON Optical parameter Wavelength: Tx 1310nm, Rx1490nm

Tx Optical Power: 0~4dBm

Rx Sensitivity: -27dBm

Saturation Optical Power: -3dBm

Connector Type: SC

Optical Fiber: 9/125ɥm single-mode fiber

User LAN
interface
4*10/100/1000Mbps auto adaptive Ethernet interfaces, Full
Duplex/Half Duplex, RJ45 connectors

 
Data Transmission

Parameter

PON Throughput: Downstream 950Mbps; Upstream 930Mbps

Packet Loss Ratio: <1*10E-12 latency: <1.5ms
 

Business

Capability

Layer 2 wire speed switching

Support VLAN TAG/UNTAG,VLAN conversion

Support Port-based speed limitation

Support Priority classification

Support storm control of broadcast

Support RSTP
 

Network

Management

Support IEEE802.3 QAM, ONU can be remotely managed by OLT

Support Remote management through SNMP and Telnet Local management
 

Management

Function

Status monitor, Configuration management, Alarm management,

Log management
 

LED  Indicators 7 indicators, for status of power supply, PON port, LOS and 4 Ethernet ports
PWR: Power up or down

OPTIN: Optical Link Status

LINK:ONU Registered

LAN: Link Status of Ethernet Interface

 power supply POE pin : 45+,78-
POE Voltage:18-48vdc
Power consumption <6W
Operating condition Operating temp: -40℃~+80℃, 
operating humidity:10-90%(non-condensed)
Storing condition Storing temp: -30~+60℃, storing humidity: 10-90% (non-condensed)
Dimension 205mm*125mm*28mm(length*width*height)
Net weight 2Kg
Application