IEEE802.3BT 12V/6A POE Splitter 72W Power-Over-Ethernet Module

1.Product characteristics

●Compliance with IEEE802.3at& bt &af standard.

●48V~57V wide operating voltage range.

●Maximum output power up to 72W; Rated output: 12V/6A.

●The output ripple is less than 200 mV.

●Conversion efficiency can be as high as 92% (input: 48V output)12V@6A).

●Withovercurrent, short circuit, under voltage, surge andother excellent reliability and circuit protection.

●crusts standard size: 90mm*63mm*15mm

●Input/Output: isolate 1500Vdc.
●High reliability: The design meets the 5 million hour average failure interval.

Description

 The module is designed to extract power from conventional Class 5 to Class 6 Ethernet cable twisted pairs and meets the IEEE 802.3bt Power-Ethernet (PoE) standard.bt the same time, the module allows the power supply category to select "Intermediate Overlap" and "End Overlap" power supply without distinguishing polarity.

 Based on the IEEE 802.3bt standard, this paper establishes information connection about the connection status, device type, power consumption level of the receiving device PD, and then applies power supply to port compatible devices based on PSE to power the PD through ethernet.

 This module DC/DC converter works in a wide input voltage range and low ripple low noise output.The DC/DC converter also has built-in output overload, output short circuit and overtemperature protection, and provides a 1500Vdc (input/output) electrical isolation.