480.941.4286 1702 W 10TH Place Tempe, AZ 85281
You are here: Home > PoE Switch > 100M PoE Switch with Uplink Gigabit Port
Products

100M PoE Switch with Uplink Gigabit Port

16-Port 10/100M POE Switch With Uplink 2 Gigabit RJ45 port+1Gigabit SFP port

16*10/100M POE Port
2*10/100/100M RJ45 Port
1*10/100/1000M SFP Port
INQUIRY
Description Specification Application

16-Port 10/100M POE Switch With Uplink 2 Gigabit RJ45 port+1Gigabit SFP port

MODEL:TS6216P-2G1F



Product Description:

 

  The 16 ports Standard POE switch provides power and data to wireless access point and IP camera, using Power over Ethernet(PoE) over a single Cat-5 cable. The 16 Ethernet ports can be used for any 10/100 Mbps link and also can supply industry-standard IEEE 802.3af power. Advanced Auto detection gives power only to 802.3af powered devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the standard automatically determines PoE requirements, speed, duplex, and cable type using Auto detection.

 

Easy Cabling Installation

  With data and power over Ethernet from one unit, The poe switch shall reduce cables and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. It is a great selection for expanding your home or office network.





Features:
 

16*10/100Mbps POE port;
2*10/100/1000Mbps  UP Link Port Network 
1*10/100/1000Mbps SFP Uplink
250m Distance;Vlan support
REALTEK Chipset
Support IEEE802.3AF/AT
Whole Power:300W 
All port supported by MDI/MDIX auto flip and self negotiation
Supply 16 10/100Mpbs adaptive high speed forwarding data packet non-lost port.
Support IEEE802.3x flow control for Full-duplex mode and backpressure for Half-duplex mode.
Each port max. power supply reached 30W..




Explanation of Function Switch
Fuunction Work mode Functional Description
N Stnadard exchange mode all ports communicate freely and adapts to common transmission environment.
V Port isolation mode
  • The switch Switches to VLAN mode
S 250m long distance mode Switch to SUPM mode ,downlink(1-16)seppd limit is 10M,to achieve Maximum 250meters signal and POE power supply (Please use GB wire)


Application:
  • Wireless Access Point
  • IP Camera
  • IP Phone
  • Computer Networks

 

Model 16FE PoE +2G+1SFP port 250m POE Switch 
Model No. TS6216P-2G1F
PoE Port 1 to 16 port support IEEE802.3af/at 10/100M
 UP link RJ45 port 17th-18th port support 1000Mbps,
UP link SFP port 19th port support 1000Mbps,
PoE output 15.4W/30W    IEEE802.3af/at
PoE whole power ≤300W
PoE type End-span
Power distance ≤250m
Network Standard IEEE 802.3 IEEE802.3u802.3x802.3af/at
Network Medium 100/1000BASE-TX: 5 class and above non shielded twisted pair
Data Distance ≤250m
Switch capability 20Gbps
Forwarding Mode Store and forward
Forwarding Rate 100Mbps:14880pps
1000Mbps:14800pps
1000BASE-T: 1488095pps/port
MAC Address 4K MAC address table
Port function Power priority mechanism, fast and forward, MAC automatic learning and aging
IEEE802.3X Full-duplex and mode and backpressure for Half-duplex mode
Indicator LINK/ACT. 100Mbps;POE Status indicator;   POWER indicator;EXTENDER indicator
Working Environment Working Temperature: -10°-- 55°C
Input power AC100-240V 50/60HZ
Weight 3.0kg
Size 290mm*195mm*45mm(L*W*H)

Oder Information
 
Model Model description
TS6208P-1G1F 8 Port 10/100M PoE Switch +1Gigabit Rj45+1Gigabit SFP ,  IEEE 802.3af, 15.4W per port, Total power consumption: 120W
TS6208P-2G 8 Port 10/100M PoE Switch +2 Gigabit Rj45 ,  IEEE 802.3af, 15.4W per port, Total power consumption: 120W
TS6216P-2G1F 16 Port 10/100M PoE Switch +2Gigabit Rj45+1Gigabit SFP ,  IEEE 802.3af, 15.4W per port, Total power consumption: 300W